Gadgets, Gear, and Drones
A few months ago, I decided to refurbish my quite old Oakley Fives Squared. I polished the metallic Os and the lenses. But the lenses still left a lot to be desired so I ordered replacement lenses from Visionary Lenses via Amazon. The first package got lost in transit. I got in touch with VL and they immediately sent a new package which finally did arrive. Well actually I had to go to the post office and pick it up. The lenses were just as described and fit perfectly.
I wanted to let Jeanne start using her new iPad mini already. But not without a case. I like OtterBox products (and their clones) so I looked around but I found only the Apple Smart Cover (expensive and not very protective) and some generic cases with built-in covers (not very protective nor flexible). So, for a change, I ended getting a genuine Otterbox case.
The Otterbox Defender for the iPad mini is a high-risk heavy-duty case. The case is composed of three major pieces: a silicone outer jacket, a 2-piece poly-carbonate inner shell, and a cover/stand. The poly-carbonate inner shell locks together and sandwiches the iPad mini. It includes a built-in screen protector. The silicon jacket then wraps around the inner shell and covers the back and the sides. The material is a stiff type of silicone rubber that OtterBox uses in its new casings.
The buttons have push-through covers that are made of the same stiff material. They are definitely stiffer but still reasonable to press. The microphone port, Lightning port, and silent switch are also covered by stiff flaps but are easily opened with a fingernail. The flaps are generously sized and the ports should be easily accessible to most accessories. There are deep-set cutouts for the front and back cameras.
The whole case fits the iPad mini snugly and makes it look very rugged and like it could bounce off the floor. Perfect for a tablet meant to be carried around and used by Jeanne.
After a few months of use, my knock-off OtterBox Commuter chipped and cracked so I looked for replacement case. Over the holidays, Edong accompanied me in the search. It was tough going because every shop were carrying mostly iPhone 5 cases. We did find a knock-off OtterBox Commuter at the place where he got his own case. But it was P650 and it wasn’t even well-made. Today, I dropped by the phone accessories section of a nearby mall and ended up at the stall of this Chinese guy at the far end of the section. He showed me not just a Commuter (P250) but also a Defender (P700). They were good copies. Definitely better than my old one. The Commuter even had stiffer silicone similar to the one being used by OtterBox. I asked for his last price and he said P200 for the former and P600 for the latter. I asked him if I can get both for P750 and after some thought he agreed. But I’m sure he still got a tidy profit. In fact, the other stall keepers were actually getting stocks from him while we were transacting.
The Otterbox Commuter is a mid-level risk case slotting between a bumper and a heavy-duty case like the Otterbox Defender. Unfortunately, they’re rather expensive at P2,100 or thereabouts at local shops. And then I saw Edong’s Class A OtterBox Commuter case for his Samsung Galaxy S-III. “Class A” is a euphemism for knock-off so it was way cheaper. I was impressed with the quality (for the price) so I got one for my own phone.
Just like its “inspiration”, the case is composed of two pieces: a silicone inner layer and a polycarbonate outer layer. The silicon layer covers the back and wraps around the edges giving the screen a slightly raised protective rubber bezel. This protects the screen from direct contact when the phone is face down. The buttons have touch-through covers but are still reasonably easy to press. The proprietary Apple USB port is covered by a flap and should be easily accessible to most accessories. There are cutouts for the camera, flash, and silent switch. The silent switch is still easily accessible with a finger.
The polycarbonate layer clips onto and around the silicone layer giving it another layer of protection. The whole case fits the iPhone snugly and makes it look like it could bounce off the floor. I’m just concerned about the the durability of the polycarbonate considering this is just a “Class A”. But at P300 (and could be lower) a pop, it should be less painful to replace.
Leslie finally came back from his onshore assignment and he dropped this off at my desk: My new Casio G-Shock GW2310FB-1CR. Casio G-Shocks are known for their resistance to shocks (e.g. hard knocks and strong vibrations). They are designed primarily for sports, military, and outdoor adventure oriented activity. Of course, they’re also water-resistant to 200M. Operators may have Rolexes and Omegas but when they’re actually operating, they wear G-Shocks. And the color of this particular model, all black, backs up the walk with the look.
Aside from being a helluva beater of a watch, it’s also a gadgety watch. Consider the specs:
Unfortunately, it doesn’t have the compass, altimeter/barometer and thermometer function of the recently departed Suunto Observer. Also, this particular inverted display is a bit hard to read especially since the numbers are smaller than those on the Observer. Finally, the backlight doesn’t remain on while being operated but shuts down in 1 or 3 seconds, depending on the setting. On those, Suunto had it beat. But at $150, it’s still a lot of bang for the buck.
Rating: 4/5