DIY Micro SIM Adapter

Michelle borrowed the iPhone for the wedding she attended last night. Since my micro SIM won’t work with the E51, I had to make my own Micro SIM Adapter. After about half an hour, I was able to make one and, more importantly, it actually worked. Here’s how to do it in case you find yourself in a similar predicament.

Things you need:

  1. An old SIM
  2. The old SIM’s carrier card
  3. The micro SIM’s carrier card
  4. Some tape
  5. A cutter
  6. A nail file

Procedure:

  1. Tape the two SIM’s carrier cards together with the SIM’s carrier card at the bottom and the Micro SIM’s carrier card at the top. This will serve as your guide.
  2. Replace the old SIM into it’s carrier card.
  3. Use the cutter to trace a slot for the Micro SIM on the old SIM using the hole on the Micro SIM’s carrier card as a guide
  4. Slowly but surely cut progressively deeper into the old SIM until you create a hole. Be careful as the sides are a bit thin.
  5. File a bit with the nail file for a snug fit.
  6. Voila! Your own Micro SIM Adapter!