Tag Archives: whoop
Building A Prototype Armor 65 Brushless Whoop
The Makerfire Armor 65 (and it’s cousin the LDARC Tiny 6X) is a good entry-level whoop package. However, it has a few problems for me. First, the motors are brushed(!!!). Second, the FC has no OSD. So I build a prototype Armor 65 or Tiny 6X brushless whoop.
Makerfire Armor 65 Unboxing
Specifications
- Wheelbase 65mm
- Motors 716 17600KV
- Propellers 4-blade 31mm/0.8mm
- FC Betaflight F3 V3.2.4
- VTX 5.8GHz 25mW 16CH, integrated with FC
- Camera 199C 800TVL 150 degrees FOV
- Battery 3.8V 260mAh 30C
Package Contents
1 Makerfire Armor 65 Plus
1 3.8V 260mAh LiPo with JST-PH 2.0 connector
1 USB charger
1 prop removal tool
5 set spare props
Low Profile Rakonheli 66mm With Beecore Brushless FC
An all-in-one brushless FC and ESC board has finally been released. It took a while for me to get my hands on one and even longer to get to building with one. Now, I use it with my favorite brushless whoop frame. Here’s how to build Rakonheli 66mm brushless whoop with Beecore Brushless AIO FC and ESC.
Building A Better BWhoop B06
The Boldclash BWhoop B06 is a good entry-level brushless whoop. However, it has a few problems for me. First, the motors are not good. There are reported problems of shaft collets and bushings falling off. Second, the FC has no OSD. Third, I prefer my whoops tiny, and by that I mean 65mm (okay, a smaller version is supposedly out but it’s not yet widely available). So I build a better BWhoop B06.
